Electric actuated thread 3 pcs ball valve introduction:
Electric actuated thread 3 pcs ball valve is made up of a three-pieces body type ball valve connected to the electric actuators, Electric actuated thread 3 pcs ball valve can resistance to high pressure, hydraulic pressure and high temperature, the maximum working pressure can maintain good sealing performance and compressive strength, uniformity, especially suitable for the special working condition of the high temperature and high pressure situations.In the absence of specific requirements, Electric actuated thread 3 pcs ball valve  body material is required to be 304 or above stainless steel.According to the requirements of the use of electric actuator can be configured, the medium for the switch two control or proportional adjustment.
 
Electric actuated thread 3 pcs ball valve Technical parameters :
Nominal diameter: DN15 ~ DN50(mm)
Nominal pressure::  PN10 ~ 100,Class 150 ~ Class 600
Connection form:thread connection
Spool form: O-ball spool
Electric control: (with hand wheel)
Structural form: 3 pieces body
Supply voltage:AC110V, AC220V, AC380V (other customized DC24, etc.)
Body material: WCV, CF8 CF3 CF8M CF3M or others
Ball core material:A105, F304, F316, F316L or thers
Adjustable range: 15-60 seconds (customized)
Applicable temperature: -40℃ ~ 450℃
Actuator switch type: (switch two mode), intelligent adjustment (4-20ma analog signal control), optional explosion-proof series